New and solid one-piece strap buttons made of hardened steel with self-tapping wood thread. Screw with self-tapping wood thread for maximum hold in wood for almost all instruments with existing screws in standard dimensions. Includes high-grade felt washers for ultimate protection of guitar's finish.
Important:
- We recommend choosing the strap button first to match the size of the existing hole in the guitar.
- If the hole is too big or too small, please choose a different strap button or reduce, close, re-drill or extend the hole.
- If necessary, countersink separately in the area of the outer lacquer layer to prevent the lacquer from flaking off when screwing in the strap button.
- Carefully screw in the strap button into the wood and, if it is too tight, unscrew it again and gradually drill up the drill hole.
- If the strap button is too easy to screw in, then reduce or close the hole and drill again appropriately.
- Tighten the strap button "hand-tight" to the instrument body. Do not continue by force. The wood may break, flake off the paint and tear off the strap button.
- Please check the secure fit of the strap button in the wood regularly and retighten the screw if necessary or reduce or close an enlarged hole as described and re-drill.
a.) S-Locks are compatible with all existing Schaller Security Locks like this:
- Strap button old SecLock + lock new S-Lock (without silent feature!)
- Strap button new S-Lock + lock old SecLock only limited, we do not recommend it.
- Please always use our new S-Lock lock with Lock-Wheel on your strap, then you will always be compatible with all strap buttons and at the same time you will always use all the advantages of our new Lock-Wheel.
- Please always make sure that the lock is engaged in the strap button, the lock is attached to the belt in such a way that the strap button is secured in the U-shape of the lock and that the instrument does not rotate.
b.) One strap for several instruments
- The strap button on the S-Locks comes in one size (12 mm in diameter): its dimensions do not vary across the three sizes—S, M, and L (with threads) and Classic (without thread).
The S-Locks new strap button:
- New and unique one-piece construction, easy to install via 3 mm (1/8") Allen key.
- Special 4.5 mm wood thread in S-Locks size L for maximum grip. Optionally available in sizes S (3.5 mm) and M (4.0 mm). Please refer to the installation instructions in the description below for size specifications.
- Hardest steel for maximum wear resistance and safety
- Including high-grade felt washers to protect your instrument
- The strap button on the S-Locks comes in one size (12 mm in diameter): its dimensions do not vary across the three sizes—S, M, and L (with threads) and Classic (without thread)
Special: The S-Locks “Silent Feature”
- When used with the S-Locks strap lock button, lock, and lock wheel, there’s no more rattling.
- Connect the strap lock button, lock, and lock wheel, then give them a shake!
- Sounds of silence: Whether you’re working on stage or in the studio, S-Locks don’t rattle!
|
